Support for original ELS27 v4 interface

Post multiecuscan feature requests
Post Reply
AlfaRed69
Posts: 15
Joined: 21 Jun 2010, 19:28

Support for original ELS27 v4 interface

Post by AlfaRed69 » 08 Apr 2019, 21:33

Hi yani,
Is it possible in the future to have support for the original ELS27 v4 interface?
At the hardware level it supports the KKL function and is wired on pins 1 & 9 yellow connector is pin 3 & 11 blue connector.
From the manufacturer's website I learn that this is an alternative function - this is a protocol that can be enabled on this contact when the relay is activated in the adapter. The relay is activated by a specific command and for this there must be support from the software side.
Link info: https://els27.ru/index.php?route=information/information&information_id=7
Sorry for my English!
Thank you

Post Reply