GRANDE PUNTO,PUNTO 03 COMMUNICATION PROBLEM

multiecuscan program usage help
Post Reply
alekos
Posts: 2
Joined: 05 May 2013, 18:06

GRANDE PUNTO,PUNTO 03 COMMUNICATION PROBLEM

Post by alekos » 10 Jan 2019, 19:35

Good evening,I have problems in communication
with many control units(body computer,airbag,instrument....)
in Grande Punto,Punto "03 mainly.
I work with one Can Tie Car multiplexer and in above units,
the program asks 3 pin adapter(the models are 2008 and up)
and can not find them.What is the problem?
I see this problem in all previous versions,from 2.02
and 3.6 till now.Is `there any fix for this?
I wait your response,you can see this I mean in simulation mode
in these models.Have a nice night...

kido.resuri
Posts: 30
Joined: 23 Apr 2016, 16:08

Re: GRANDE PUNTO,PUNTO 03 COMMUNICATION PROBLEM

Post by kido.resuri » 21 Jan 2019, 19:26

You need an A3 adapter for certain modules, not a 3 pin adapter. Check the Supported Vehicles page, and the adapter diagram below:

Image
https://www.puntonium.hu

Post Reply