FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

multiecuscan program usage help
Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 11 Jan 2017, 20:12

Hello LukasCA

Even without modification you should be able to connect to the engine control unit with the interface.

The resistor may only cause problems for CAN bus controllers.
And the motor control of the 159 is not read via CAN bus.

Which driver was installed
You have established all the settings

What is the interface test in Multiecuscan?

Greeting Eddy

Alex2011fiat
Posts: 2
Joined: 11 Jan 2017, 22:42

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alex2011fiat » 11 Jan 2017, 22:52

Hi
I have this ELM327 v1.5 Wifi and I can't connect to CAN interfaces (Body). Only engine.
The car is Fiat Stilo.

It's the same problem with a resistor? Which one please?
Thanks a lot!!!
Attachments
IMG_20170112_004623.jpg
IMG_20170112_004623.jpg (2.21 MiB) Viewed 4000 times
IMG_20170112_003325.jpg
IMG_20170112_003325.jpg (2.42 MiB) Viewed 4000 times
IMG_20170112_003044.jpg
IMG_20170112_003044.jpg (2.47 MiB) Viewed 4000 times

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 11 Jan 2017, 23:20

Hallo

It is the Resistor R1 with the Number 121


´Greeting Eddy

obdspecialist
Posts: 3
Joined: 12 Jan 2017, 15:51

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by obdspecialist » 12 Jan 2017, 15:55

Hi


No resistor to detach or replace

Buy this one and you get into 100% ECUs of FIAT GROUP


http://www.obdspecialist.it/prodotto-14 ... -FREE.aspx

:idea:

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 12 Jan 2017, 19:13

Hello

@ obdspecalist

This one also ;)

http://www.ebay.de/itm/152303738760?_tr ... EBIDX%3AIT


and to an better price ;)

Greeting Eddy

GAlt
Posts: 7
Joined: 02 Sep 2016, 09:53

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by GAlt » 14 Jan 2017, 18:48

Hello guys, i have chinese Elm327 Bluetooth, but some 2016 version :D i doubt it can be done to connect with CAN, even to see the board, but although i will post picture of the board if someone know something?

Best Regards
Attachments
IMG_20170114_203645.jpg
IMG_20170114_203645.jpg (4.46 MiB) Viewed 3971 times
IMG_20170114_203630.jpg
IMG_20170114_203630.jpg (4.55 MiB) Viewed 3971 times

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 14 Jan 2017, 22:03

Hello Galt

Make an Interface Test with Multiecuscan
and post an Screen with an Image

On your Board can´t find an Bridge Resistor

the Motor ecu ist read not with CAN Bus
Also your connect must with no one modifikation

Greetings Eddy

GAlt
Posts: 7
Joined: 02 Sep 2016, 09:53

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by GAlt » 15 Jan 2017, 14:34

Alfaeddy wrote:Hello Galt

Make an Interface Test with Multiecuscan
and post an Screen with an Image

On your Board can´t find an Bridge Resistor

the Motor ecu ist read not with CAN Bus
Also your connect must with no one modifikation

Greetings Eddy
COMMAND: ATZ
RESPONSE: ATZ



ELM327 v1.5>

COMMAND: ATI
RESPONSE: ATI

ELM327 v1.5>

COMMAND: ATE0
RESPONSE: ATE0?>

COMMAND: ATL0
RESPONSE: ATL0?>

COMMAND: ATH0
RESPONSE: ATH0?>

COMMAND: ATSPC
RESPONSE: ATSPC?>

COMMAND: ATS0
RESPONSE: ATS0?>

COMMAND: ATCAF0
RESPONSE: ATCAF0?>

COMMAND: ATCFC0
RESPONSE: ATCFC0?>

COMMAND: ATCRA 7B0
RESPONSE: ATCRA 7B0?>

COMMAND: ATSH 7B0
RESPONSE: ATSH 7B0?>

COMMAND: ATAT1
RESPONSE: ATAT1

OK>

COMMAND: ATST41
RESPONSE: ATST41?>

COMMAND: ATBI
RESPONSE: ATBI?>

WARNING: This interface is not compatible with ELM 327 1.3! Will not connect to any CAN module.

This is my test. This warning in the end i have and in my another WiFi Elm, but there is no problem with CAN, but this....

p.s. I know that engine is not on CAN

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 15 Jan 2017, 20:17

Hello Galt

I thought it already this interface is not compatible with MES and also AlfaOBD

There are only a few v1.5 ELM interfaces that work.

This has nothing to do with a bridge resistor.


Greeting Eddy

GAlt
Posts: 7
Joined: 02 Sep 2016, 09:53

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by GAlt » 16 Jan 2017, 10:41

Alfaeddy wrote:Hello Galt

I thought it already this interface is not compatible with MES and also AlfaOBD

There are only a few v1.5 ELM interfaces that work.

This has nothing to do with a bridge resistor.


Greeting Eddy
Thanks a lot anyway Eddy. I thought that v1.5 will not be a problem, becouse my WiFi version is also 1.5 and do not have this problem, but anyway...which version of bluetooth is best?

Post Reply