FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

multiecuscan program usage help
stefancaromov
Posts: 8
Joined: 07 May 2014, 07:24

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by stefancaromov » 07 May 2014, 15:23

Thanks a lot for the info. Any price about obdkey, cos in that site you gave me i didnt found ?

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 07 May 2014, 15:38

Hi

OBDkey BT = 125 €

OBDkey usb = 112 €

It's just that at this price
which is then equal to the CANtie interface can buy incl MES software.

Greetings Eddy

stefancaromov
Posts: 8
Joined: 07 May 2014, 07:24

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by stefancaromov » 07 May 2014, 15:40

Thanks one more time.

bensaint100
Posts: 1
Joined: 11 May 2014, 19:51

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by bensaint100 » 11 May 2014, 20:05

Hi there I have this interface and tried connecting to Punto mk1 1.6 elx 90 it connects tells you the voltage and then disconnects again within 10 seconds this is the interface can you help me I want to read the can on ecu. If I buy a modified elm 327 will this work
Attachments
image.jpg
image.jpg (1.39 MiB) Viewed 10124 times
image.jpg
image.jpg (1.56 MiB) Viewed 10124 times
image.jpg
image.jpg (1.64 MiB) Viewed 10124 times

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 11 May 2014, 20:39

Hello

Your ELM requires no modification since there is no bridge resistor
I suspect that you are using an old or the wrong driver.
Try this

http://www.ftdichip.com/Drivers/VCP.htm

Otherwise, controlling again all the settings such as Latency Time
and Com port

Greetings Eddy

hafidz
Posts: 1
Joined: 14 May 2014, 13:56

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by hafidz » 14 May 2014, 14:39

[img]pCloud%20Link%20-%20http://pc.cd/lTY[/img]

please help.. bluetooth connected but cant communicate ecu/ not connect to ecu.

thanks

mattydr67
Posts: 169
Joined: 02 Apr 2010, 17:07
Location: Bucuresti, Romania
Contact:

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by mattydr67 » 14 May 2014, 16:29

It is possible to make it works
Good luck

image.jpg
image.jpg (689.79 KiB) Viewed 10108 times

abraXXious
Posts: 2
Joined: 14 May 2014, 22:06

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by abraXXious » 14 May 2014, 22:22

Hey guys!

Great work sorting out all of these faulty adapters!

I see a few pages back a fellow posted an image of a red PCB Elm adapter but did not supply good enough piccies. Well, I have the same adapter and they seem to be quite common on ebay these days.

Please PLEASE help!

I can connect to the engine etc, but when I attempt connect to the SERVICE etc option it requested a Yellow Adapter 3 cable (which I then plug in), but then cannot connect.

I assume I have the same resistor/termination problem, however my PCB is laid out differently to the others.

Please find photos of the PCB in question.

Thanks in advance guys.
Attachments
P5150004.JPG
P5150004.JPG (313.69 KiB) Viewed 10105 times
P5150003.JPG
P5150003.JPG (314.13 KiB) Viewed 10105 times
P5150002.JPG
P5150002.JPG (311.94 KiB) Viewed 10105 times

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by Alfaeddy » 16 May 2014, 08:12

Hello abraxxious

Remove the white plug please Holder with 8 contacts
including I suspect the bridge resistance.

Your pictures must not be so large, only the resolution should be high
Not so blurred

Greetings Eddy



Edit: It should be around this ELM?
then remove the yellow-marked resistor.

1 markiert.jpg
1 markiert.jpg (147.58 KiB) Viewed 10089 times

abraXXious
Posts: 2
Joined: 14 May 2014, 22:06

Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)

Post by abraXXious » 19 May 2014, 04:39

Woohoo! It works!


Thanks guys!

Post Reply