Multiecuscan 2.0 - WORK IN PROGRESS!!!

General messages
yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Multiecuscan 2.0 - WORK IN PROGRESS!!!

Post by yani » 05 Mar 2010, 22:11

Hi guys,

I have not posted a new version for more than a month, and lots of people are wondering what will come next, and when it will be ready.
So, I decided to write this topic and give you some info of what is going on with the project.

I'm currently working on Multiecuscan 2.0.
I made major improvements in the interface, functionality and graphics.
Some of them are:
- grouping of the ECUs - Engine, ABS, Airbag, etc.
- ELM 327 support - the program will have the same functionality as with k-line/VAGCOM cables. ELM 327 v1.3 or newer is required for CAN access
- multilanguage support for the UI
- multilanguage support for the errors and parameters - I currently have most of them in English, German, French, Russian... Will probably have Polish, Chech, Italian, Spanish and Hungarian soon...
- lots of changes and new features in the parameters section
- lots of changes and new features in the graphics/recording section
- generation/saving of diagnostic reports
- new features in the actuator section
- actuator execution status
- STILO SERVICE RESET

I will also add some new ECUs like ABS 5.3 and 1.3 Multijet engines.

Another big change is that there will be an additional commercial version of the program. Some of the above features (like multilanguage parameters and errors) will be available only in the comercial version.

My current plan is to have Multiecuscan 2.0 ready by the end of March.

Regards,
Yani

jaboleq
Posts: 4
Joined: 27 Jan 2010, 09:41

Re: Multiecuscan 2.0 - WORK IN PROGRESS!!!

Post by jaboleq » 06 Mar 2010, 11:11

yani wrote: I'm currently working on Multiecuscan 2.0.
Thats great!!
yani wrote: Another big change is that there will be an additional commercial version of the program. Some of the above features (like multilanguage parameters and errors) will be available only in the comercial version.
Worst news item I would not like to read here.

winphoenix
Posts: 4
Joined: 28 Feb 2010, 00:02

Re: Multiecuscan 2.0 - WORK IN PROGRESS!!!

Post by winphoenix » 06 Mar 2010, 13:11

Hello, this is a great job, congratulations! I wanted to know if it will support the old ECU (before 1999) eg ECU Magneti Marelli IAW 1AF (Bravo '96) in a future version of multiecuscan (maybe the version 2.0 ???)

Best regards

ARomeo
Posts: 86
Joined: 06 Jan 2010, 10:45

Re: Multiecuscan 2.0 - WORK IN PROGRESS!!!

Post by ARomeo » 06 Mar 2010, 18:54

If you send me all words in English I will send you them in Bulgarian

dutchronnie
Posts: 7
Joined: 01 Mar 2010, 19:03

Re: Multiecuscan 2.0 - WORK IN PROGRESS!!!

Post by dutchronnie » 06 Mar 2010, 21:23

Mybe i can do some translation from English to Dutch?

Zubrania
Posts: 12
Joined: 01 Feb 2010, 13:52

Re: Multiecuscan 2.0 - WORK IN PROGRESS!!!

Post by Zubrania » 07 Mar 2010, 07:15

ARomeo wrote:If you send me all words in English I will send you them in Bulgarian
I think yani is enough Bulgarian :)

petke
Posts: 5
Joined: 04 Dec 2009, 19:32

Re: Multiecuscan 2.0 - WORK IN PROGRESS!!!

Post by petke » 08 Mar 2010, 19:59

Hi!
For translation to Hungarian, Serbian and Croatian I'am here!

Good luck!
Best regards!

luklyz
Posts: 2
Joined: 08 Mar 2010, 20:26

Re: Multiecuscan 2.0 - WORK IN PROGRESS!!!

Post by luklyz » 08 Mar 2010, 20:29

Hi everybody
Great program for Fiat :D
I can help with translation to Polish

alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: Multiecuscan 2.0 - WORK IN PROGRESS!!!

Post by alfa156sarajevo » 09 Mar 2010, 15:12

yani wrote:Another big change is that there will be an additional commercial version of the program.
just few questions:
do you know how much it will cost (approximately)?
can it be paid with PayPal or Credit cards?
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars

sandron29
Posts: 1
Joined: 10 Mar 2010, 07:51

Re: Multiecuscan 2.0 - WORK IN PROGRESS!!!

Post by sandron29 » 10 Mar 2010, 08:42

Hi Yani! Will version 2.0 support ECU Fiat Marea 1.8 98 year (Hitachi ECU).
I can translate to Russian.

Post Reply