Fiat Stilo 1.9 multijet 120PS CAN setup

General messages
Post Reply
alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: Fiat Stilo 1.9 multijet 120PS CAN setup

Post by alfa156sarajevo » 23 Apr 2012, 09:26

I think it should be same for your Stilo too... :roll:

Before you start procedure just check with FES is the cruise light working or not - connect to dashboard!

After that just go to: FIAT > STILO 1.9JTD > Body > CAN Setup / PROXI Alignment Procedure > Adjustments (F7) > Cruise control light > click Execute (F10) > choose: Enabled > go to: PROXI Alignment Procedure > click Execute (F10) > when you got success to all systems than turn the key OFF > wait for 15-30 seconds > turn key ON > turn the cruise switch on - it should be on!
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars

alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: Fiat Stilo 1.9 multijet 120PS CAN setup

Post by alfa156sarajevo » 27 Apr 2012, 22:12

So you can not connect only to CAN Setup / PROXI Alignment Procedure on Fiat Stilo 1.9 8V multijet 120ps but you can connect to other systems like engine ecu, service, dashboard... :?: :roll:
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars

Post Reply