Problem & Request

Digital CAN dashboard/trip computer
Post Reply
stellwagenc
Posts: 6
Joined: 08 Nov 2012, 07:05
Location: Germany
Contact:

Problem & Request

Post by stellwagenc » 02 Oct 2014, 07:26

Hello,

yesterday i have used FES Dashboard for the first time and i have found a bug (on Fiat Stilo 1.9 JTD). The vehicle speed is not correctly (is it mph?). Look at the pictures.

And is it possible to add other time sections? Measurements from zero to XXX are not good. better are elasticity measurements like 50 to 100 or 60 to 120 or 80 to 160 or 100 to 200.

many thanks in advance
Christopher
Attachments
stilo_tacho1.jpg
stilo_tacho1.jpg (318.87 KiB) Viewed 20219 times
stilo_tacho.jpg
stilo_tacho.jpg (225.95 KiB) Viewed 20219 times

alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: Problem & Request

Post by alfa156sarajevo » 08 Oct 2014, 08:42

So you have been driving 150 km/h and FES Dash was showing 84 km/h (or something else)? :D

Did you checked speed with MES? How much there was your speed? The same more-less or totally different?

If with MES is all OK than I guess it is a bug in FES Dash... :roll:
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars

stellwagenc
Posts: 6
Joined: 08 Nov 2012, 07:05
Location: Germany
Contact:

Re: Problem & Request

Post by stellwagenc » 08 Oct 2014, 17:07

Yes, i was driving 150km/h with cruise control and FES Dash was showing 84 km/h...

The speed in MES is correct.

Post Reply