Fiat tipo 2018 Cruise control retrofit

General messages
Post Reply
Alexpiu
Posts: 2
Joined: 18 Oct 2023, 16:08

Fiat tipo 2018 Cruise control retrofit

Post by Alexpiu » 18 Oct 2023, 16:16

Hello everyone!

I recently had a friend come to me for a Cruise control activation on a Fiat tipo 2018 1.4.. The car came without one and he put a second hand steering wheel with buttons and wiring. The problem is that i activate the option with MES but it stil doesn't work. The CC buttons on the steering wheel light up for a few seconds when putting The ignition in ON position, then they go off.

Also, i get proxy allignment errors for the airbag node NAB ORC Request put of range error.
Anybody know how can i work this through?

abarthmultijet
Posts: 123
Joined: 17 Feb 2021, 22:37
Location: Oss, Netherlands

Re: Fiat tipo 2018 Cruise control retrofit

Post by abarthmultijet » 31 Oct 2023, 20:15

Had a similar problem when I send my ecu out to get remapped. I could activate it with ignition on and the screen said: Cruise control activated.

Send the ecu back to them and they fixed it right away. I think your engine ecu needs to be programmed also.
Abarth Punto Evo, Fiat Doblo 263 1.4 t-jet, Audi S4 B8.5, 1.3 Multijet specialist, Uconnect 7 specialist,

chrener
Posts: 176
Joined: 07 Jun 2018, 13:08
Location: Košice, Slovakia
Contact:

Re: Fiat tipo 2018 Cruise control retrofit

Post by chrener » 08 Dec 2023, 14:06

HI!
Bodycomputer on Fiat Tipo signed with L0 does not support cuise control!
If you want CC just swap BCM with L1 or L2
Jeep Renegade 1.4 MultiAir TURBO 75th Anniversary

Post Reply