rear camera after uconnect swap

General messages
Post Reply
mokumaniak
Posts: 5
Joined: 27 Jan 2022, 06:35

rear camera after uconnect swap

Post by mokumaniak » 27 Jan 2022, 06:52

Hi all,
i will align the proxy on my 500x 1.4 140cv after uconnect swap (6.5 to7)
how to enable thev rear camera?
thank you 4 your help

chrener
Posts: 175
Joined: 07 Jun 2018, 13:08
Location: Košice, Slovakia
Contact:

Re: rear camera after uconnect swap

Post by chrener » 01 Feb 2022, 20:41

Check in engineering menu in RVC status if your U7 have RVC support...
Jeep Renegade 1.4 MultiAir TURBO 75th Anniversary

mokumaniak
Posts: 5
Joined: 27 Jan 2022, 06:35

Re: rear camera after uconnect swap

Post by mokumaniak » 02 Feb 2022, 11:53

thx look on this picture, in Engineering mode RVC config is in grey not in white
I can't go to the RVC config
Only basic Data (FW number)


https://1drv.ms/u/s!AhaD6GepAxliljvsCHN6GoGHNAIj?e=xPagop

mokumaniak
Posts: 5
Joined: 27 Jan 2022, 06:35

Re: rear camera after uconnect swap

Post by mokumaniak » 07 Feb 2022, 18:02

it's ok

my fiat 500X with uconnect 6.5

I brougth an uconnect 7 (version 500X 2020) with double USB (it's important) on Ebay.

When i mounted it on my 500X (2016)

Milage flash and rear camera have disappeared

With multiecuscan + blue and grey plug, i realign the proxy with a custom.......

My new Uconnect 7 works fine with activation of carplay.

arma500x
Posts: 11
Joined: 01 Jun 2019, 16:08

Re: rear camera after uconnect swap

Post by arma500x » 22 Jun 2022, 17:32

anchio sono passato da uconnect 6.5 al 7 e solo la telecamera non compatibile con il 7 va cambiata

[S130 moderator]
I also switched from uconnect 6.5 to 7 and only the camera not compatible with the 7 should be changed‎

Post Reply