Scan 500L 500X 2018

General messages
Post Reply
mamomorris
Posts: 2
Joined: 25 Jul 2020, 17:06

Scan 500L 500X 2018

Post by mamomorris » 11 Dec 2021, 14:17

hi guys, i can't connect to these cars, i use the elm in picture, i read that there is something to do, but i can't understand, someone could explain me better. Thanks to those who want to help me. this is my ELM interface Image
Thanks to all.

mokumaniak
Posts: 5
Joined: 27 Jan 2022, 06:35

Re: Scan 500L 500X 2018

Post by mokumaniak » 30 Jan 2022, 11:19

Hello I had the same issue with a aliexpress cable, now i brougth one on a ebay french seller. It will arrive this week

abarthmultijet
Posts: 116
Joined: 17 Feb 2021, 22:37
Location: Oss, Netherlands

Re: Scan 500L 500X 2018

Post by abarthmultijet » 06 Feb 2022, 14:59

Newer vehicles need a SGW Bypass,

https://alfissimo.com/home/1599-sgw-dongle-new-version-for-onboarddiagnostic-multiecuscan.html
Abarth Punto Evo, Fiat Doblo 263 1.4 t-jet, Audi S4 B8.5, 1.3 Multijet specialist, Uconnect 7 specialist,

arma500x
Posts: 11
Joined: 01 Jun 2019, 16:08

Re: Scan 500L 500X 2018

Post by arma500x » 22 Jun 2022, 17:24

bungiorno prima cosa prendere un tester cercare pin 6 e 14 misirare se avete una resistenza 150 hom circa bisogna smontare elm 327 individuare la resistenza e toglerla
linterfaccia va messa in alta velocita
poi provare se si riesce a entrare in tutte le interfaccie diversamente entra solo in controllo motore parlo 500x
le modifiche co sono nel forum magari non trovate linterfaccia uguale ma con un tester x pin 6 e 14

[S130 Moderator]
bungiorno first thing take a tester look for pin 6 and 14 misirare if you have a resistance about 150 hom you have to disassemble elm 327 identify the resistance and remove it‎
‎ the interface must be put in high speed‎
‎ then try if you can get into all the interfaces otherwise it only enters into engine control I speak 500x ‎
‎ the changes co are in the forum maybe you do not find the same interface but with a tester x pin 6 and 14‎

Post Reply