trying to use cantiecar interface after long inactivity

General messages
Post Reply
jensen1
Posts: 2
Joined: 17 Sep 2012, 10:55
Location: jersey channel islands
Contact:

trying to use cantiecar interface after long inactivity

Post by jensen1 » 23 Nov 2021, 14:35

Dear all
I would like to use my Multiecuscan and cantiecar interface again after a few years of inactivity.
I thought I best update the interface first, having plugged it into the office computer to do the firmware update, everything worked as should and the lights flashed as stated, but now I have a dead interface. I get an address violation when I plug in the usb lead plus windows tells me there is a fault with the usb drive. Not sure what to do next, I know I will have to re-new my licence to use the multiecuscan program at 50 euros but I didnt think I would crash the cantiecar.
any help would be appreciated interface is version 2.1 serial number wtcadmXX (not sure if I should divulge serial number)
kind regards
Jensen1

s130
Posts: 941
Joined: 20 Jan 2010, 10:07
Location: Wrexham, North Wales

Re: trying to use cantiecar interface after long inactivity

Post by s130 » 23 Nov 2021, 17:13

I'm not a Cantiecar interface owner or user but if it were me then I would be contacting Cantiecar directly. AND ALSO the vendor you bought you Cantiecar interface from. They will / should know more about the interface etc. than most people here.
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus

abarthmultijet
Posts: 116
Joined: 17 Feb 2021, 22:37
Location: Oss, Netherlands

Re: trying to use cantiecar interface after long inactivity

Post by abarthmultijet » 02 Dec 2021, 19:34

Hello,

I have a Cantiecar but don't know where i can find what firmware version i have, how do i check it? Maybe i can help you
Abarth Punto Evo, Fiat Doblo 263 1.4 t-jet, Audi S4 B8.5, 1.3 Multijet specialist, Uconnect 7 specialist,

Post Reply