ECU type

General messages
lopez306
Posts: 6
Joined: 23 Nov 2009, 12:54
Location: Poland, Cracow

ECU type

Post by lopez306 » 07 Dec 2009, 10:55

Does anybody know what ECU type has Stilo 1.6 from 2002 ??

yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Re: ECU type

Post by yani » 07 Dec 2009, 13:12

Hi,
Stilo 1.6 uses either IAW 5NF or IAW 5SF CF4.
Since your car is from 2002 I think it has IAW 5NF.
Unfortunately, none of these ECUs is supported in multiecuscan yet. Check for future versions.

alfaGT
Posts: 15
Joined: 19 Dec 2009, 14:24

Re: ECU type

Post by alfaGT » 19 Dec 2009, 17:28

Hello,

Does anybody know what ECU type has the Alfa Romeo GT 1,9 JTDM 150 from 2007 and the FIAT Panda II 1,3 JTDM from 2008 ?

yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Re: ECU type

Post by yani » 19 Dec 2009, 20:31

Hi,

Alfa Romeo GT 1,9 JTDM 150 is probably EDC16/CF4.
FIAT Panda II 1,3 JTDM is either Marelli 6JF or Marelli 6F3.

Yani

alfaGT
Posts: 15
Joined: 19 Dec 2009, 14:24

Re: ECU type

Post by alfaGT » 23 Dec 2009, 16:10

yani wrote: Alfa Romeo GT 1,9 JTDM 150 is probably EDC16/CF4.
FIAT Panda II 1,3 JTDM is either Marelli 6JF or Marelli 6F3.
In the Multiecuscan 1.4.1 System list there is EDC16/CF3 for the Alfa and Bosch ABS 8 for the Panda :o

yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Re: ECU type

Post by yani » 23 Dec 2009, 20:45

alfaGT wrote: In the Multiecuscan 1.4.1 System list there is EDC16/CF3 for the Alfa and Bosch ABS 8 for the Panda :o
I guess that EDC16/CF3 is for the earlier years. Since your car is from 2007 it should have EDC16/CF4.
It is ok to use ABS8 for the Panda, but it is for the ABS. For the engine you need Marelli 6JF or Marelli 6F3.

Yani

alfaGT
Posts: 15
Joined: 19 Dec 2009, 14:24

Re: ECU type

Post by alfaGT » 24 Dec 2009, 08:10

Ok thank you yani.

Pablo
Posts: 4
Joined: 30 Dec 2009, 20:39

Re: ECU type

Post by Pablo » 30 Dec 2009, 20:52

Hello yani,
please answer me, what ECU type has the Alfa Romeo 156 1,9 JTDM 150hp from 3/2005 ?
I'm testing ECU type EDC16/CF3, but shows this error : "Invalid ISO code for..."
Thx, Pablo

bady555
Posts: 15
Joined: 26 Dec 2009, 12:08

Re: ECU type

Post by bady555 » 03 Jan 2010, 17:55

your car is CF4 model not CF3

Pablo
Posts: 4
Joined: 30 Dec 2009, 20:39

Re: ECU type

Post by Pablo » 03 Jan 2010, 19:40

bady555 wrote:your car is CF4 model not CF3
Bady, thanks for your answer, but are you sure ?

Post Reply