ECU not responding

General messages
Post Reply
P.Björk
Posts: 4
Joined: 29 Mar 2021, 17:33

ECU not responding

Post by P.Björk » 29 Mar 2021, 17:46

Hi all
New to this forum and have some questions. I have a ELM327 WiFi that connects perfect to my Ducato -12 if I choose “scan”. So I bought the soft, but it is impossible to do anything else the just scan?? Not possible to any ECU for any car. Just ECU not responding check connection.
Is it that it takes a while before registration works or did I just loose 65€?

/Per
Top
P.Björk
Posts: 4
Joined: 29 Mar 2021, 17:33

Re: ECU not responding

Post by P.Björk » 06 Apr 2021, 10:33

Anyone that has an ide what’s wrong? Can’t even connect to engine ecu?? Works with ok with CarScanner and shows parameters and stuf. With Multiecuscan there is nothing, just Scan mode that works??

/Per
Top
s130
Posts: 753
Joined: 20 Jan 2010, 10:07
Location: Southampton, United Kigndom
Contact:
Contact s130

Re: ECU not responding

Post by s130 » 06 Apr 2021, 19:58

As you have connectivity with other software with your hardware but not MES then as a purchaser of MES you need to contact MES Support directly.

Please let us all know how you get on and connected again.
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus
Top
Post Reply

Return to “General”