Page 1 of 1

Cable problem

Posted: 29 Feb 2020, 15:03
by admin
Hi,

I have bought a ELM cable from idiagnostics for my Fiat Bravo mk2.
When connected the gauge cluster displays ASR,ESP and Hill Holder error. Also, the external temperature is not displaying and the car wont start.

When connecting the KKL (also from idiagnostics) and a cheap Bluetooth OBD2 adapter everything is working fine.
Has anyone had any similar issues? The cable is working fine on the Fiat Punto mk2 and Fiat Stilo.
Is the required pinout for the Bravo different than for the Stilo?

Car info:
Fiat Bravo 2008
1.4 Tjet

Re: Cable problem

Posted: 06 May 2020, 13:33
by giobbi80
admin wrote:
29 Feb 2020, 15:03
Hi,

I have bought a ELM cable from idiagnostics for my Fiat Bravo mk2.
When connected the gauge cluster displays ASR,ESP and Hill Holder error. Also, the external temperature is not displaying and the car wont start.

When connecting the KKL (also from idiagnostics) and a cheap Bluetooth OBD2 adapter everything is working fine.
Has anyone had any similar issues? The cable is working fine on the Fiat Punto mk2 and Fiat Stilo.
Is the required pinout for the Bravo different than for the Stilo?

Car info:
Fiat Bravo 2008
1.4 Tjet
do you have solved? i have the same problem but with lancia delta

Re: Cable problem

Posted: 29 Mar 2021, 19:08
by admin
Unfortunately no, I am still looking for a solution. If anyone could offer some advice regarding this issue?
Maybe it is an earthing problem?