Lancia Ypsilon 2011 0.9 TwinAir Turbo wont let me connect to Body Computer

General messages
Post Reply
MilanFan1
Posts: 3
Joined: 24 Mar 2019, 13:26

Lancia Ypsilon 2011 0.9 TwinAir Turbo wont let me connect to Body Computer

Post by MilanFan1 » 24 Mar 2019, 13:40

Hello Guys,

I have a problem to connect to the Body Computer of my Lancia Ypsilon 2011 0.9 Twin Air Turbo.
I have registred Version of Multiecuscan 4.4 with OBD 2 Connector Stardiag USB Interface CAN327 FTDI CANBUS.

In attachments is my Report of my Car. There is listed the : Body Computer Delphi (846), unfortunatly it wont let me connect.

Am I doing something wrong?
If I try to connect to my Engine, then I get connected, only the Body Computer dose not work.

Thanks in anticipation for any help


Attachments:

Code: Select all

https://www.dropbox.com/s/i4x7grqlamspboq/Report1.pdf?dl=0

kobra
Posts: 20
Joined: 16 Mar 2011, 18:22

Re: Lancia Ypsilon 2011 0.9 TwinAir Turbo wont let me connect to Body Computer

Post by kobra » 25 Mar 2019, 17:22

And adapter No. 3 used?

MilanFan1
Posts: 3
Joined: 24 Mar 2019, 13:26

Re: Lancia Ypsilon 2011 0.9 TwinAir Turbo wont let me connect to Body Computer

Post by MilanFan1 » 26 Mar 2019, 00:48

kobra wrote:
25 Mar 2019, 17:22
And adapter No. 3 used?
Now I know what I missed :D

Today I will try

MilanFan1
Posts: 3
Joined: 24 Mar 2019, 13:26

Re: Lancia Ypsilon 2011 0.9 TwinAir Turbo wont let me connect to Body Computer

Post by MilanFan1 » 26 Mar 2019, 15:35

So I tried wiht the Yellow Adapter Cabel,

Now I am getting in the Body Computer.

I wanted to register my "new" Uconnect Radio that I build in. Tryed the Proxy allignment but it fails.

Any suggestions what I can do?

Thanks in anticipation

Post Reply