Abarth Xenons

General messages
Post Reply
BRULIA
Posts: 1
Joined: 27 Sep 2018, 14:39

Abarth Xenons

Post by BRULIA » 27 Sep 2018, 14:44

I have installed new coilovers on an Abarth 500c, and the Xenon's are now too low. Tried connecting the multiscan to the car but it says failed connection on the Xenon headlight section. It works fine on other sections like Engine.

What could it be?

I have used the Green connector and have tried the Yellow now too, but still says failed.

Post Reply