Bytes for Fiat 500 Proxy Alingment

[Andrea11uno]

No problem, hope you are happy with it.

Try to plug in your phone, this code supports apple carplay/ android auto. If it doesn't work i know how to activate it. Send me a PM!

Hi, how can i contact you to activate CarPlay? I need help

[Andrea11uno]

Qualcuno conosce la procedura per attivare CarPlay?

Does anyone know the procedure to activate CarPlay?

[Timbo172]

Anybody worked out whether the G-Meter can be enabled on a retrofit TFT conversion? Or does the BCM/sensor need to be a later version for it to work?

Was hoping it would be possible to change the HEX.

Also enabling the throttle gauge on the TFT dash?

[JassyIvy]

Hello

I replace original radio on my Fiat 500 year 2016 for a 7" Uconnect.

Now I have DTC DAB aereal antena.

When I try align proxy I got error.

Can someone help me with proxy manual configuration to fix this please?

My log:

Reading CAN configuration data ...
CAN CONFIGURATION DATA:
4F <a href="tel:80 00 05 00 00 00 00">80 00 05 00 00 00 00</a> 4F <a href="tel:80 00 05 10 00 00 00">80 00 05 10 00 00 00</a> <a href="tel:09 00 00 01 10 00 00">09 00 00 01 10 00 00</a> <a href="tel:00 01 00 00 00 10 00">00 01 00 00 00 10 00</a> <a href="tel:00 00 00 00 00 00 00">00 00 00 00 00 00 00</a> 00 00 00
4F <a href="tel:80 00 05 00 00 00 00">80 00 05 00 00 00 00</a> <a href="tel:09 00 00 04 00 00 00">09 00 00 04 00 00 00</a> 00 4F <a href="tel:80 00 05 10 00 00 00">80 00 05 10 00 00 00</a> <a href="tel:09 00 00 04 10 00 00">09 00 00 04 10 00 00</a> <a href="tel:00 09 00 00 04 00 00">00 09 00 00 04 00 00</a> 00 00
<a href="tel:33 32 31 35 30 30 31">33 32 31 35 30 30 31</a> <a href="tel:38 33 30 37">38 33 30 37</a> 4F <a href="tel:55 54 50 55 54 44">55 54 50 55 54 44</a> 4A <a href="tel:49 54 20 16 04 06">49 54 20 16 04 06</a> 4F <a href="tel:80 00 05 00 00 00 00">80 00 05 00 00 00 00</a> <a href="tel:09 00 00 04 00 00 00">09 00 00 04 00 00 00</a> 00 01 C2 73 06 FE 00 1C C0 <a href="tel:00 00 00 16 00 01 00">00 00 00 16 00 01 00</a> <a href="tel:94 06 41 01 00 40 00">94 06 41 01 00 40 00</a> <a href="tel:00 00 75 41">00 00 75 41</a> 0A 0C 0D 01 80 2E <a href="tel:24 00 00 00 00 31 05">24 00 00 00 00 31 05</a> <a href="tel:11 00 00 00 04 00 00">11 00 00 00 04 00 00</a> <a href="tel:00 00 00 00 00 00 00">00 00 00 00 00 00 00</a> <a href="tel:00 00 00 00 00 00 00">00 00 00 00 00 00 00</a> <a href="tel:00 00 00 00 00">00 00 00 00 00</a> 9E <a href="tel:00 94 00 22 00 04 88 00 00">00 94 00 22 00 04 88 00 00</a> <a href="tel:20 80 00 00 40 00 01">20 80 00 00 40 00 01</a> 00 0F <a href="tel:00 00 00 00 01 00 40">00 00 00 00 01 00 40</a> <a href="tel:01 00 00 00 00 00 00">01 00 00 00 00 00 00</a> <a href="tel:00 00 00 00 00 00 00">00 00 00 00 00 00 00</a> 00 00
Body Computer Node (BCM/NBC)
Engine Control Node (ECM/NCM)
Electric Steering Node (EPS/NGE)
Dashboard Node (IPC/NQS)
Brake System Node (ABS/BSM/NFR)
Side Acceleration / Yaw Node (NYL)
Parking Sensor Node (PAM/NSP)
Airbag Node (NAB/ORC)
Entertainment Telematic Node (ETM)
(Multiecuscan 4.7R3)
07-11-2023 11:17:17
Fiat 500 1.4 16V T-Jet/MultiAir
CAN Setup / PROXI Alignment Procedure (2014+)
--------------------------------------------------------------

Body Computer Node (BCM/NBC): EOL Ok
Engine Control Node (ECM/NCM): Ok
Electric Steering Node (EPS/NGE): Ok
Dashboard Node (IPC/NQS): EOL Ok
Brake System Node (ABS/BSM/NFR): Ok
Side Acceleration / Yaw Node (NYL): Ok
Parking Sensor Node (PAM/NSP): Ok
Airbag Node (NAB/ORC): EOL Ok
Entertainment Telematic Node (ETM): Added / EOL Failed

EXECUTING ADJUSTMENT...
PROXI ALIGNMENT PROCEDURE
Writing CAN configuration data ...
Writing to module: Body Computer Node (BCM/NBC) SUCCESS!
Writing to module: Dashboard Node (IPC/NQS) SUCCESS!
Writing to module: Airbag Node (NAB/ORC) SUCCESS!
Writing to module: Entertainment Telematic Node (ETM) FAILED! - Request out of range error
| Byte 148: 00->1C
FAILED TO EXECUTE
Entertainment Telematic Node (ETM) FAILED! - Request out of range error

Byte 148 must be changed from 00 to 1C in the Custom Proxi window then Execute a Proxi Alignment.

The error is highlighting a setting or feature on the new head unit that is available but not switched on.

This is an excellent a knowledge article that explains how to change, troubleshoot and fix Proxi code errors.

https://vk2.net/articles/Abarth-UConnect%205-to-7-Upgrade

[theGman]

Hi everyone, I have a huge problem. I was using proxi alignment to check/enable carplay on my Uconnect 5". I made changes to bytes 148 and 157. No my car is completly dead. I tried to do a MES scan before it died. And it said too many modules disabled. Is it possible to reset the BCM? Or does it need to be done by a garage? Thanks.


EDIT: My problem was the battery was drained, 10.6v, therefore not enough voltage for various modules giving me multiple errors. Battery replaced and back up and running. Still don't have Carplay

[theGman]

HELP! I've just broken my car....

ALl i was trying to do was acrivate carplay!

I ffel sick

Hey Slayez I've just done the same trying to activate carplay. How did you get BCM recovered? My car is completely dead.

[DanielCep]

Is it possible to install an airbag ECU from a different vehicle into a Fiat Ducato to potentially enhance safety features or unlock additional functionalities?

[GeorgeDuh]

Is it possible to replace the Body Control Module (BCM) in a Fiat 500 using Multiecuscan software, and if so, what are the steps involved in the process?

[grun500]

Thanks for all the info.
As I understand the old types Fiat 500 have 87 bytes
The newer types have 157 bytes?

is there any overview regarding what Byte has what options?

[Dashcoder]

Hello MichL,

I have send you a private message.

Hello my friend ,

I changed the radio on my Fiat 500 , I try to do proxy alignement but it failed , can you help me with good coding please . Thank you so much

33 32 31 35 30 30 31 39 34 33 39 4F 55 54 50 55 54 44 4A 49 54 20 16 06 18 4F 84 00 05 10 00 00 00 09 00 00 04 10 00 00 00 81 C2 75 06 FE 00 1C C0 C0 10 00 16 00 01 00 94 06 01 01 00 40 00 00 20 75 41 0A 0C 0D 01 80 2E 24 00 00 00 00 31 02 51 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 47 00 94 08 52 00 04 88 02 00 20 80 00 00 40 00 B7 00 0F 00 00 00 80 05 00 E0 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Structure / BCM (Body Computer Module)
Body Computer Delphi (312)
Code ISO: 00 00 60 15 14
Code V.I.N.: ZFA3120000JA39948
Numéro HW: 0312N6E4101 - Ver: 01
Numéro SW: 28626565 - Ver: 1412
Errors found:
B10AA-4A - Contrôle configuration PROXI - Incorrect component installed