Help please !!!!

General messages
Post Reply
jony
Posts: 46
Joined: 05 Dec 2009, 22:17

Help please !!!!

Post by jony » 05 Dec 2009, 22:30

hello friend ,

I am new in the forum.

My car is Fiat Pálio 1.2 , engine 8 valves ( year 1996 ) , ECU magneti Marelli , but is not OBD2 , It´s old protocol , is K-L line , ( pre-obd ) , the diagnostic socket is 3 pin ( fiat-tester )

Some program for it ?

multiecuscan doesn´t support my car .

How to do ?

Thanks.

jony
Posts: 46
Joined: 05 Dec 2009, 22:17

Re: Help please !!!!

Post by jony » 06 Dec 2009, 12:43

Hello friend !!!!

thank you for all

Any plan to upgrade the ECU support for FIAT/ALFA/LANCIA/ petrol engine ( benzine ) ?

is possible to add this soft for petrol engines ?

Thank you for your colaboration .

yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Re: Help please !!!!

Post by yani » 06 Dec 2009, 16:55

yes,
I'm planning to add petrol ECUs.
I already have support for some IAW ECUs.
I also have support for IAW49F which might be the ECU that is used in your car. It is used in some 1.2 Palios.

jony
Posts: 46
Joined: 05 Dec 2009, 22:17

Re: Help please !!!!

Post by jony » 06 Dec 2009, 21:42

Hello friend , YANI !!!!!!!

thanks, for this good program

thank you , best regards.

Post Reply