Conecting to a Fiat Barchetta

maggiora_barchetta · Post by **maggiora_barchetta** » 19 Mar 2010, 14:22

Hi guys!

first of all I would like to thank you for this site! it's a treasure!

I have a fiat barchetta '99 with Hitachi..
I see that it is included in the list of the ECU scan. I have bought the 3pin to OBD and a KKL cable to Usb. However I do not have drivers for this and as a result I can not connect.

anybody knows where can I download them?

thank you in advance!

dutchronnie · Post by **dutchronnie** » 19 Mar 2010, 20:24

Here you can find drivers for the cable.

http://www.ross-tech.com/vag-com/usb/usb-config.html

topogatto · Post by **topogatto** » 22 Mar 2010, 12:56

For Vag-Com FTDI based cable can you use this drivers:

http://www.ftdichip.com/Drivers/VCP.htm

Bye
Diego

maggiora_barchetta · Post by **maggiora_barchetta** » 25 Mar 2010, 16:03

thank you all guys!

finally I connected to the Ecu!

Multiecuscan

Conecting to a Fiat Barchetta

Conecting to a Fiat Barchetta

Re: Conecting to a Fiat Barchetta

Re: Conecting to a Fiat Barchetta

Re: Conecting to a Fiat Barchetta