Cannot change injectors code

General messages
Post Reply
Giacomo
Posts: 4
Joined: 22 Mar 2015, 08:18

Cannot change injectors code

Post by Giacomo » 17 Jun 2015, 07:00

Hi,
I have changed the injectors on my Fiat Punto '03 1.3 JTD because of excessive black smoke.
Now it's less smoke but I didn't solve the problem completly.
I decided to change the injectors code using Multiecuscan function F7 but after many attemps
it didn't works... still old Injectors code in F4 Parameters menu.
I tryed with 2.4 and also 2.5 Multiecuscan , and a ELM 327 1.5 usb interface.
What's wrong?
Thanks

AlfaRed69
Posts: 16
Joined: 21 Jun 2010, 19:28

Re: Cannot change injectors code

Post by AlfaRed69 » 28 Jun 2015, 22:41

use interface kkl, definitely work on that ECU ..

Giacomo
Posts: 4
Joined: 22 Mar 2015, 08:18

Re: Cannot change injectors code

Post by Giacomo » 29 Jun 2015, 21:22

Hello,
You was right... I've done it with my KKL interface.
Thanks a lot

Post Reply