No support for Grande- Starjet 16v

General messages
Post Reply
cmosfxx
Posts: 6
Joined: 25 Apr 2014, 01:02

No support for Grande- Starjet 16v

Post by cmosfxx » 25 Apr 2014, 01:08

So there's still no support for Starjet's Bosch Motronic ME7.6.3 ECU
(but there IS for Panta 16v Motronic ME7.6.3?)

Am I missing something here or it's still an unreadable ecu ?

saoirse
Posts: 6
Joined: 25 Apr 2014, 05:01

Re: No support for Grande- Starjet 16v

Post by saoirse » 25 Apr 2014, 05:32

Hi, this would be nice if Yani could do that.
I use for Grande Punto Me 7.9.10 is also good, only
Battery voltage is not exactly

cmosfxx
Posts: 6
Joined: 25 Apr 2014, 01:02

Re: No support for Grande- Starjet 16v

Post by cmosfxx » 25 Apr 2014, 11:29

saoirse wrote:Hi, this would be nice if Yani could do that.
I use for Grande Punto Me 7.9.10 is also good, only
Battery voltage is not exactly
Hi, what do you mean? You are reading starjet ecu using tjet's ecu ISO?
( or your car is a tjet? )

saoirse
Posts: 6
Joined: 25 Apr 2014, 05:01

Re: No support for Grande- Starjet 16v

Post by saoirse » 25 Apr 2014, 15:57

My Grande Punto 1.4 16V 95PS Year 2008
ECU Bosch Motronic Me7.6.3.
But I read with MultiECUScan-Bosch Motronic Me7.9.10 CF5/EOBD (1.4 16V)
Or have we misunderstood

cmosfxx
Posts: 6
Joined: 25 Apr 2014, 01:02

Re: No support for Grande- Starjet 16v

Post by cmosfxx » 25 Apr 2014, 16:36

saoirse wrote:My Grande Punto 1.4 16V 95PS Year 2008
ECU Bosch Motronic Me7.6.3.
But I read with MultiECUScan-Bosch Motronic Me7.9.10 CF5/EOBD (1.4 16V)
Or have we misunderstood
Hmm how is this possible. When I'm trying to read this way it gives me error " only simulate mode "

Multiecuscan free.

saoirse
Posts: 6
Joined: 25 Apr 2014, 05:01

Re: No support for Grande- Starjet 16v

Post by saoirse » 25 Apr 2014, 17:06

I do not understand.
what they have for a Grande Punto, ECU engine,
what is registered for MultiEcu or free.

cmosfxx
Posts: 6
Joined: 25 Apr 2014, 01:02

Re: No support for Grande- Starjet 16v

Post by cmosfxx » 26 Apr 2014, 12:15

ok ok the problem was my obd adaptor... everything works fine now using tjet's ecu ;)

Post Reply