Can I use multiecuscan for programming keys for Fiat punto ? (immobilizer)
I have a dealer created key but teach costs 50 euros !
immobilizer
-
alfa156sarajevo
- Posts: 870
- Joined: 12 Feb 2010, 09:03
- Location: EU, Germany
Re: immobilizer
With MES you can only do a remote control programming.
Unfortunately you can not do programming the keys (neither new ones nor existing ones).
Unfortunately you can not do programming the keys (neither new ones nor existing ones).
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars
-
159sportwagon
- Posts: 39
- Joined: 24 Oct 2010, 19:12
Re: immobilizer
Hello , what is a key remote programming. I have a new key for my punto 188. I try to programming. But it's failed. After I go to fiat distributor . And the mechanic from fiat can not programming the key , too. What is the problem???
Re: immobilizer
Some keys / fobs have buttons on them for door opening & locking, alarm setting etc. These a "remote" functions which MES can program.
However MES is not able to program the key RFID chip into the car. i.e. the key cannot pre programmed into the system to allow in to disable the immobiliser.
What year was your Punto 188 manufactured/registered?
However MES is not able to program the key RFID chip into the car. i.e. the key cannot pre programmed into the system to allow in to disable the immobiliser.
What year was your Punto 188 manufactured/registered?
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus