agv4ooo via kkl on stilo mw 1.6 connected

General messages
Post Reply
wilco1v
Posts: 25
Joined: 03 Feb 2010, 21:39

agv4ooo via kkl on stilo mw 1.6 connected

Post by wilco1v » 03 Feb 2010, 22:06

hi yani
i,m happy to write that i have used your soft on my car stilo mw 1.6 16v 2003 to test engine ecu
i have used the usb -- agv 4000 exp version in the kkl modus on my asus netbook (Com6)
direct great result on screen ,thanx

my agv4000 11protocol (and can emulate elm functionality)
see stange distribution (or tunerpro24) for the agv4000 info
i use mostly modiag (expert) on the agv4000(real good eobd soft)
runs on canbus on my stilo

update :tested with dip selector (k line 7 to pin *.* )
dip pin on = 1 eobd ABS , connection ok
dip pin on = 3 eobd airbag , connection ok
dip pin on = 7 eobd engine , connection ok
dip pin on = 9 eobd electric powerstering , connection NO !!! on my car ????

need advice for connection to stilo powerstering

wilco1v (holland)
Last edited by wilco1v on 15 Feb 2010, 19:57, edited 1 time in total.

bas
Posts: 143
Joined: 10 Feb 2010, 21:47
Location: Poland(Lodz)

Re: agv4ooo via kkl on stilo mw 1.6 connected

Post by bas » 10 Feb 2010, 21:48

You have to disconnect cable from pin7 to connect to powerstering.

BAS

wilco1v
Posts: 25
Joined: 03 Feb 2010, 21:39

Re: agv4ooo via kkl on stilo mw 1.6 connected

Post by wilco1v » 15 Feb 2010, 19:48

bas wrote:You have to disconnect cable from pin7 to connect to powerstering.

BAS
hi bas
k line 7 was already diverted to pin 9 >>> powerstering still no readings for me

thanx any way

greets wilco1v

bas
Posts: 143
Joined: 10 Feb 2010, 21:47
Location: Poland(Lodz)

Re: agv4ooo via kkl on stilo mw 1.6 connected

Post by bas » 20 Feb 2010, 23:46

wilco1v wrote:
bas wrote:You have to disconnect cable from pin7 to connect to powerstering.

BAS
hi bas
k line 7 was already diverted to pin 9 >>> powerstering still no readings for me

thanx any way

greets wilco1v
Strangely, for me (Vag kkl) disconnecting from the other pins solved the problem.

BAS

Post Reply