Page 1 of 1

Re: Fiat Stilo 1.9 multijet 120PS CAN setup

Posted: 23 Apr 2012, 09:26
by alfa156sarajevo
I think it should be same for your Stilo too... :roll:

Before you start procedure just check with FES is the cruise light working or not - connect to dashboard!

After that just go to: FIAT > STILO 1.9JTD > Body > CAN Setup / PROXI Alignment Procedure > Adjustments (F7) > Cruise control light > click Execute (F10) > choose: Enabled > go to: PROXI Alignment Procedure > click Execute (F10) > when you got success to all systems than turn the key OFF > wait for 15-30 seconds > turn key ON > turn the cruise switch on - it should be on!

Re: Fiat Stilo 1.9 multijet 120PS CAN setup

Posted: 27 Apr 2012, 22:12
by alfa156sarajevo
So you can not connect only to CAN Setup / PROXI Alignment Procedure on Fiat Stilo 1.9 8V multijet 120ps but you can connect to other systems like engine ecu, service, dashboard... :?: :roll: