Fiat Stilo 1.9 multijet 120PS CAN setup

General messages
Posts: 786
Joined: 12 Feb 2010, 10:03
Location: Sarajevo, Bosnia & Herzegovina

Re: Fiat Stilo 1.9 multijet 120PS CAN setup

Postby alfa156sarajevo » 23 Apr 2012, 10:26

I think it should be same for your Stilo too... :roll:

Before you start procedure just check with FES is the cruise light working or not - connect to dashboard!

After that just go to: FIAT > STILO 1.9JTD > Body > CAN Setup / PROXI Alignment Procedure > Adjustments (F7) > Cruise control light > click Execute (F10) > choose: Enabled > go to: PROXI Alignment Procedure > click Execute (F10) > when you got success to all systems than turn the key OFF > wait for 15-30 seconds > turn key ON > turn the cruise switch on - it should be on!
www.alfadiagnostik.com
Diagnostic for Alfa Romeo, Fiat and Lancia cars
Repairing City Servo System - Power Steering on Fiat and Alfa cars
Airbag ECU reset - all vehicles, all cars, all brands and all models
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars

Posts: 786
Joined: 12 Feb 2010, 10:03
Location: Sarajevo, Bosnia & Herzegovina

Re: Fiat Stilo 1.9 multijet 120PS CAN setup

Postby alfa156sarajevo » 27 Apr 2012, 23:12

So you can not connect only to CAN Setup / PROXI Alignment Procedure on Fiat Stilo 1.9 8V multijet 120ps but you can connect to other systems like engine ecu, service, dashboard... :?: :roll:
www.alfadiagnostik.com
Diagnostic for Alfa Romeo, Fiat and Lancia cars
Repairing City Servo System - Power Steering on Fiat and Alfa cars
Airbag ECU reset - all vehicles, all cars, all brands and all models
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars

Return to General

Who is online

Users browsing this forum: Bing [Bot] and 3 guests