Grande Punto Cruise control aftermarket

General messages
TLM
Posts: 1
Joined: 24 May 2011, 06:58

Re: Grande Punto Cruise control aftermarket

Post by TLM » 24 May 2011, 07:04

a up of this topic. If someone with a GP 1.3MJT with cruise control can send his logs to help up to finish the install :)

A lot of GP 1.3MJT seems to have the connector by default. That will help a lot of personnes!

Thanks

Thibag64
Posts: 12
Joined: 20 Apr 2011, 07:51

Re: Grande Punto Cruise control aftermarket

Post by Thibag64 » 31 May 2011, 13:32

The installation and activation of the aftermarket CC has been done on this Italian forum so it is possible:
http://www.grandepuntoclub.com/forum/vi ... 32&t=33450
I don't speak Italian but I understood that they used a software called "Leonardo" to activate the CC.

EnIgMa
Posts: 301
Joined: 23 Mar 2010, 21:52
Location: Italy

Re: Grande Punto Cruise control aftermarket

Post by EnIgMa » 31 May 2011, 21:03

Yep.

Thibag64
Posts: 12
Joined: 20 Apr 2011, 07:51

Re: Grande Punto Cruise control aftermarket

Post by Thibag64 » 06 Jul 2011, 11:45

I've just tried the new version (3.04) of FES. It seems possible to install the CC by doing a "zeroing" of the engine ECU.
The zeroing works (I see the action on gearbox detection) but the CC is still not recognized.

EDIT: OK, I had not seen that the CC could be activated via proxi alignment. I will try this and give feedback.

Thibag64
Posts: 12
Joined: 20 Apr 2011, 07:51

Re: Grande Punto Cruise control aftermarket

Post by Thibag64 » 11 Jul 2011, 08:35

OK, CC is now activated on my car.
Thanks yani for implementing this function!!!

Lal B3N
Posts: 7
Joined: 09 Sep 2011, 07:02

Re: Grande Punto Cruise control aftermarket

Post by Lal B3N » 09 Sep 2011, 07:04

Thibag64 wrote:OK, CC is now activated on my car.
Thanks yani for implementing this function!!!
What was needed then? Just a CC stalk? Was all the cabling there already?

Thibag64
Posts: 12
Joined: 20 Apr 2011, 07:51

Re: Grande Punto Cruise control aftermarket

Post by Thibag64 » 09 Sep 2011, 07:15

I described the complete process on this french forum:
http://puntomag.fr/viewtopic.php?f=11&t=4986

You need to change the complete switch and I had to add a cable between switch pin 8 and OBD pin 41. The cabling is already there on some cars.

Lal B3N
Posts: 7
Joined: 09 Sep 2011, 07:02

Re: Grande Punto Cruise control aftermarket

Post by Lal B3N » 09 Sep 2011, 07:22

Thibag64 wrote:I described the complete process on this french forum:
http://puntomag.fr/viewtopic.php?f=11&t=4986

You need to change the complete switch and I had to add a cable between switch pin 8 and OBD pin 41. The cabling is already there on some cars.
Thank you. Ahh sounds complicated, shame i don't know anyone in the UK who has done it.

holbli
Posts: 7
Joined: 29 Jun 2010, 07:20

Re: Grande Punto Cruise control aftermarket

Post by holbli » 12 Sep 2011, 05:04

Hi Thibag64,

i did the same: i installed the steering column switch and activated the CC. During proxi alignment i get the following failure:

*************************************
WARNING: This vehicle is properly configured. PROXI Alignment is not needed!
EXECUTING ADJUSTMENT...
Cruise control
Old value: Disabled
New value: Enabled
COMPLETED


EXECUTING ADJUSTMENT...
PROXI Alignment Procedure
Writing CAN configuration data ...
Writing to module: Body Computer Node (NBC) SUCCESS!
Writing to module: Dashboard Node (NQS) FAILED! - Request out of range error
Writing to module: Airbag Node (NAB) SUCCESS!
FAILED TO EXECUTE
Request out of range error
*************************************

now CC is working fine, but the CC indicator in the dashboard doesn't work and my odometer value is flashing.
Did this also happen to you?


thx

Thibag64
Posts: 12
Joined: 20 Apr 2011, 07:51

Re: Grande Punto Cruise control aftermarket

Post by Thibag64 » 12 Sep 2011, 06:56

The CC indicator on the dashboard doesn't work for me either. May be there is a missing cable to add. I didn't get the dashboard flashing. I did also a "zeroing" in the engine module.

Post Reply