cable Vagcom KKL usb

General messages
Post Reply
guy
Posts: 2
Joined: 29 Sep 2010, 20:23

cable Vagcom KKL usb

Post by guy » 30 Sep 2010, 10:06

Hi,
I'm new here.
My car : Fiat Ducato 2.3 JTD - 2007 - camper
I'm interested in using the diagnostic software of Yani. I have not the intention To do the service of my car myself, but i will use it for checking alarmcodes en resetting them when necessary.
I will buy a vagcom KKL cable, but the one I found on the internet is only usable for VW, AUDI, ...
http://www.pagershop.nl/product_info.ph ... cts_id=535

Can I use this cable for my ducato and the software multiecuscan ?

s130
Posts: 941
Joined: 20 Jan 2010, 10:07
Location: Wrexham, North Wales

Re: cable Vagcom KKL usb

Post by s130 » 30 Sep 2010, 19:04

Should not be a problem, althought the supplied software will not obviously work (well it may do).

At 14 euros it is certainly worth a try and you can download Multiecuscan for free to test.

You can always sell it on to a VW/Audi enthusiast, but I doubt you will have to.
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus

guy
Posts: 2
Joined: 29 Sep 2010, 20:23

Re: cable Vagcom KKL usb

Post by guy » 30 Sep 2010, 20:07

What cable do you propose ?

alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: cable Vagcom KKL usb

Post by alfa156sarajevo » 01 Oct 2010, 13:57

You can use this cable with Yani's FES software! You just need to modify it! You can see modification please search the forum here! I am sure you are going to find the right subject!

I do not know any NL language but as far I understood this is VAG COM KKL 409.1 interface with ISO9141 protocol. Just the cable that you need.

According to supported vehicle list:
http://www.multiecuscan.net/SupportedVehiclesList.aspx
you can do everything with this cable.

Cheers! ;)
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars

Post Reply