Hope someone can help
I got a 2017 Fiat Abarth
Swapped the TFT cluster for a Euro version
Ran the proxy alignment codes, everything went through complete no errors except the logo on the cluster refuses to change to anything BUT Abarth.
I can put any other cluster EXCEPT Abarth. Makes no sense at all. Byte 65 as 60 never changes to Abarth logo.
Any thoughts?
Thanks
Missing menus from TFT display - Abarth 500
-
- Posts: 3
- Joined: 19 May 2024, 22:16
Re: 2017 Abarth TFT Cluster swap with Euro version
FioFiat500Abarth wrote: ↑22 May 2024, 18:32Hope someone can help
I got a 2017 Fiat Abarth
Swapped the TFT cluster for a Euro version
Ran the proxy alignment codes, everything went through complete no errors except the logo on the cluster refuses to change to anything BUT Abarth.
I can put any other cluster EXCEPT Abarth. Makes no sense at all. Byte 65 as 60 never changes to Abarth logo.
Any thoughts?
Thanks
Try byte 65 as 20 or 30 then byte 81 as 51
-
- Posts: 3
- Joined: 19 May 2024, 22:16
Re: 2017 Abarth TFT Cluster swap with Euro version
I think I tried byte 65 as 20. I will try the others you mentioned. Thank you!Timbo172 wrote: ↑22 May 2024, 23:09FioFiat500Abarth wrote: ↑22 May 2024, 18:32Hope someone can help
I got a 2017 Fiat Abarth
Swapped the TFT cluster for a Euro version
Ran the proxy alignment codes, everything went through complete no errors except the logo on the cluster refuses to change to anything BUT Abarth.
I can put any other cluster EXCEPT Abarth. Makes no sense at all. Byte 65 as 60 never changes to Abarth logo.
Any thoughts?
Thanks
Try byte 65 as 20 or 30 then byte 81 as 51
-
- Posts: 3
- Joined: 19 May 2024, 22:16
Re: 2017 Abarth TFT Cluster swap with Euro version
Changed byte 81 to 51 and it worked. Cluster display now Abarth. But now I get ECO and ABS warning lights on all the time.Timbo172 wrote: ↑22 May 2024, 23:09FioFiat500Abarth wrote: ↑22 May 2024, 18:32Hope someone can help
I got a 2017 Fiat Abarth
Swapped the TFT cluster for a Euro version
Ran the proxy alignment codes, everything went through complete no errors except the logo on the cluster refuses to change to anything BUT Abarth.
I can put any other cluster EXCEPT Abarth. Makes no sense at all. Byte 65 as 60 never changes to Abarth logo.
Any thoughts?
Thanks
Try byte 65 as 20 or 30 then byte 81 as 51