Connection Help needed...

multiecuscan program usage help
Post Reply
kayman55
Posts: 14
Joined: 19 Apr 2010, 10:18

Connection Help needed...

Post by kayman55 » 30 May 2010, 19:21

I have now my third ELM interface and with all of them I get in the TEST Function a Timeout error.
I cannot believe, that all interfaces are faulty...

Can someone post the exact settings of his functionable configuration?

Thx a lot

Kay

yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Re: Connection Help needed...

Post by yani » 30 May 2010, 20:01

The "timeout" error in the test function means:
- incorrect serial port number
- incorrect serial port speed
- driver not properly installed
- your interface is not powered (some interfaces are powered from the vehicle's OBD connector and need to be connected to the vehicle in order to work)

Yani

kayman55
Posts: 14
Joined: 19 Apr 2010, 10:18

Re: Connection Help needed...

Post by kayman55 » 04 Jun 2010, 11:39

TY Yani, you were right.
My Interface is obviously powered by the car. Finally it works perfect...

Thx
Kay

Post Reply