Hello all, I install uconnect 7" on Fiat500 now cant align proxy. Have this log.
Can someone help me with correct proxy configuration?
Thank you very much for help and support
Reading CAN configuration data ...
CAN CONFIGURATION DATA:
4F 80 00 05 00 00 00 00 4F 80 00 05 10 00 00 00 09 00 00 01 10 00 00 00 01 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00
4F 80 00 05 00 00 00 00 09 00 00 04 00 00 00 00 4F 80 00 05 10 00 00 00 09 00 00 04 10 00 00 00 09 00 00 04 00 00 00 00
33 32 31 35 30 30 31 38 33 30 37 4F 55 54 50 55 54 44 4A 49 54 20 16 04 06 4F 80 00 05 00 00 00 00 09 00 00 04 00 00 00 00 01 C2 73 06 FE 00 1C C0 00 00 00 16 00 01 00 94 06 41 01 00 40 00 00 00 75 41 0A 0C 0D 01 80 2E 24 00 00 00 00 31 05 11 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9E 00 94 00 22 00 04 88 00 00 20 80 00 00 40 00 01 00 0F 00 00 00 00 01 00 40 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Body Computer Node (BCM/NBC)
Engine Control Node (ECM/NCM)
Electric Steering Node (EPS/NGE)
Dashboard Node (IPC/NQS)
Brake System Node (ABS/BSM/NFR)
Side Acceleration / Yaw Node (NYL)
Parking Sensor Node (PAM/NSP)
Airbag Node (NAB/ORC)
Entertainment Telematic Node (ETM)
(Multiecuscan 4.7R3)
07-11-2023 11:17:17
Fiat 500 1.4 16V T-Jet/MultiAir
CAN Setup / PROXI Alignment Procedure (2014+)
--------------------------------------------------------------
Body Computer Node (BCM/NBC): EOL Ok
Engine Control Node (ECM/NCM): Ok
Electric Steering Node (EPS/NGE): Ok
Dashboard Node (IPC/NQS): EOL Ok
Brake System Node (ABS/BSM/NFR): Ok
Side Acceleration / Yaw Node (NYL): Ok
Parking Sensor Node (PAM/NSP): Ok
Airbag Node (NAB/ORC): EOL Ok
Entertainment Telematic Node (ETM): Added / EOL Failed
EXECUTING ADJUSTMENT...
PROXI ALIGNMENT PROCEDURE
Writing CAN configuration data ...
Writing to module: Body Computer Node (BCM/NBC) SUCCESS!
Writing to module: Dashboard Node (IPC/NQS) SUCCESS!
Writing to module: Airbag Node (NAB/ORC) SUCCESS!
Writing to module: Entertainment Telematic Node (ETM) FAILED! - Request out of range error
| Byte 148: 00->1C
FAILED TO EXECUTE
Entertainment Telematic Node (ETM) FAILED! - Request out of range error
Fiat 500 proxy error
Re: Fiat 500 proxy error
I need the same help i bought a car that had the interior stolen and the media screen was stolen i bought a secondhand screen but the trip keeps flashing i have tried proxy alignment but keeps failing. I need someone to code the screen to the vehicle. Can someone help i am willing to pay for this.