ELM 327 Install Question

multiecuscan program usage help
Post Reply
kiranchitnis
Posts: 2
Joined: 20 Apr 2010, 03:33

ELM 327 Install Question

Post by kiranchitnis » 26 May 2010, 15:13

I have installed the drivers for an ELM 327 cable that I purchased. It shows up fine in device manager as well.

I installed version 2.1 of Multiecuscan and set it up to use ELM 327 as stated here - http://www.multiecuscan.net/HowToUse.aspx . I am unable to find the "Test" option to check if the ELM 327 interface responds to the commands. Is there something I am missing here?

yani
Site Admin
Posts: 1175
Joined: 06 Nov 2009, 16:40

Re: ELM 327 Install Question

Post by yani » 26 May 2010, 16:37

The "Test" function is in Multiecuscan 2.2.1.

Yani

kiranchitnis
Posts: 2
Joined: 20 Apr 2010, 03:33

Re: ELM 327 Install Question

Post by kiranchitnis » 28 May 2010, 04:43

Thanks Yani. Downloading the latest version now. I was able to connect successfully. I'll evaluate the product and place an order soon.

Post Reply