Template use

multiecuscan program usage help
Post Reply
CheeseMonster
Posts: 3
Joined: 10 Jan 2023, 21:23

Template use

Post by CheeseMonster » 10 Jan 2023, 21:34

When I create a template I can see it in the Parameters > Templates menu, I can see all ten templates (0 to 9) and the parameters I've selected. I then select the template I want to use and click OK.

At this point I have no idea visually that my template is loaded, the parameter list is the same no matter which template I select and no parameter is ticked or highlighted in red.

Can someone offer some help please?

CheeseMonster
Posts: 3
Joined: 10 Jan 2023, 21:23

Re: Template use

Post by CheeseMonster » 12 Jan 2023, 17:01

I'm trying to use Templates but I still can't, so hoping this update will get me the answer?
If I create a template with one parameter in template 0 (zero) and then load that template I get a page displaying ever parameter not the single parameter from my template.
This can't be right!
I would attach images but the forum doesn't allow that!
Is there a way of contacting who ever writes MultiECUScan?
Thanks

s130
Posts: 941
Joined: 20 Jan 2010, 10:07
Location: Wrexham, North Wales

Re: Template use

Post by s130 » 16 Jan 2023, 08:52

Templates do NOT change the number off parameters visible in MES. The templates are so you can have one or more specific parameters selected to monitor. e.g. Template 1: RPM and Temeprature. Template 2: Battery Voltage and Vehicle Speed and Odometer.
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus

Post Reply