Throttle body reset.

multiecuscan program usage help
Post Reply
lee069
Posts: 1
Joined: 08 Jan 2023, 11:37

Throttle body reset.

Post by lee069 » 08 Jan 2023, 11:42

Hi, my Fiat 500 1.2 has started to hunt on idle after I removed the throttle body to clean it. I have checked for vacuum leaks but can't see anything split. I have read that possible a throttle body reset might fix the fault, will Multiecuscan do this reset?

Regards Lee.

s130
Posts: 941
Joined: 20 Jan 2010, 10:07
Location: Wrexham, North Wales

Re: Throttle body reset.

Post by s130 » 09 Jan 2023, 08:25

Yes - if that is your actual problem. From the MES program:

Throttle Position Learning

This procedure allows the control unit to learn the throttle's correct position and should be run when the throttle body and/or control unit is replaced or whenever this adjustment is necessary.
After executing this procedure got to Parameters section and check the status of parameter 'Throttle learn status'. It should report 'Learnt' when the procedure has completed successfully.
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus

Post Reply