connection issues

multiecuscan program usage help
Post Reply
Billb2020
Posts: 1
Joined: 07 Dec 2022, 15:10

connection issues

Post by Billb2020 » 07 Dec 2022, 15:24

Gentlemen

I can't connect to ECU in my Chrysler 2013 300
I got this software hoping to add SRT performance pages to the car Uconnect radio screen,
when I click yes to automatically search for interface connected, it returns with you need ELM 327
but I do have it and it's connected to the car port with red lights on .
This is what I have done to troubleshoot :
updated windows 11 driver
Downloaded CMD21236 driver, unzipped and installed it
The ELM 327 is Bluetooth interface without USB cable .
Any help is appreciated.

Any help will be appreciated

shpuncik
Posts: 306
Joined: 19 Oct 2018, 16:43

Re: connection issues

Post by shpuncik » 07 Dec 2022, 21:40

make sure you're using correct driver by checking VID/PID of adapter. check MES installation manual on how to configure adapter

guri300
Posts: 3
Joined: 21 May 2023, 05:11

Re: connection issues

Post by guri300 » 21 May 2023, 05:15

You need go into settings of multiecuscan, then interface, then click scan interface.
that solved my problem but still im not able to get srt performance pages as it says invalid iso?? don"t know much about that.

Post Reply