Proxi fails - Airbag Node (NAB/ORC) FAILED! - Request out of range error

multiecuscan program usage help
Post Reply
djbase667
Posts: 4
Joined: 03 Mar 2022, 08:28

Proxi fails - Airbag Node (NAB/ORC) FAILED! - Request out of range error

Post by djbase667 » 03 Mar 2022, 08:56

Hello everyone,

my Blue & Me module died so I wanted to remove it an do a Proxi, but encountered some errors.

Did someone else encounter a Airbag Node (NAB/ORC) FAILED! - Request out of range error Failed Proxi alligment with Multiecuscan v4.7r3 ?

->[102A] errors: Byte 69: 7C->4C

Is it fixed in v4.8 or is it another problem ?

Thanks!

---
Update : Situation is the same but after reading more about it I came to 2 conclusions... Or Multiecuscan 's range needs to be adjusted for the Airbag Node that it would allow 7C as byte 69, so the range needs to be set further from 4C.
Or I need to change 7C to another value... with the ALT+CTRL+C for custom proxi aligment... But which value ? Somewhere between 00 & 4C I presume... but which one ? As I do not understand why it has 7C as value...

Tried a friends multiecuscan v4.8 laptop and same problem :'(
---


Davide
Reading CAN configuration data ...
CAN CONFIGURATION DATA:
4F 04 00 05 40 00 00 00 4F 04 00 05 40 00 00 00 00 00 00 00 40 00 00 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00
4F 04 00 05 40 00 00 00 09 04 00 04 42 00 00 00 4F 04 00 05 40 00 00 00 09 04 00 04 42 00 00 00 09 04 00 04 40 00 00 00
30 34 31 39 31 30 30 37 35 36 36 4F 55 54 50 55 54 2D 4A 49 54 20 11 06 09 4F 04 00 05 40 00 00 00 09 04 00 04 42 00 00 00 C7 C5 51 07 8F 00 3C 10 38 00 00 36 00 07 0F 9C 06 2B 03 46 00 00 02 00 3A 51 0A 7C 00 00 00 00 09 00 00 00 00 37 03 91 00 38 00 40 00 00 00 04 08 00 00 00
Body Computer Node (BCM/NBC)
Engine Control Node (ECM/NCM)
Electric Steering Node (EPS/NGE)
Dashboard Node (IPC/NQS)
Brake System Node (ABS/BSM/NFR)
Climate Control Node (HVAC/NCL)
Parking Sensor Node (PAM/NSP)
Airbag Node (NAB/ORC)
Convergence Telematic Node (CTM)
Receiver Radio/Radio Navigator Node (NRR/RMN)
(Multiecuscan 4.7R3)
3/03/2022 0:35:21
Alfa Romeo Giulietta 2.0 JTDm 16V
CAN Setup / PROXI Alignment Procedure
--------------------------------------------------------------
EXECUTING ADJUSTMENT...
PROXI ALIGNMENT PROCEDURE
Writing CAN configuration data ...
Writing to module: Body Computer Node (BCM/NBC) SUCCESS!
Writing to module: Dashboard Node (IPC/NQS) SUCCESS!
Writing to module: Climate Control Node (HVAC/NCL) SUCCESS!
Writing to module: Airbag Node (NAB/ORC) FAILED! - Request out of range error
[102A] errors: Byte 69: 7C->4C
Writing to module: Convergence Telematic Node (CTM) FAILED! - Timeout error
Writing to module: Receiver Radio/Radio Navigator Node (NRR/RMN) SUCCESS!
FAILED TO EXECUTE
Airbag Node (NAB/ORC) FAILED! - Request out of range error

Danilosc26
Posts: 1
Joined: 23 Oct 2022, 23:52

Re: Proxi fails - Airbag Node (NAB/ORC) FAILED! - Request out of range error

Post by Danilosc26 » 23 Oct 2022, 23:56

Same problem here… You fixed it?

djbase667
Posts: 4
Joined: 03 Mar 2022, 08:28

Re: Proxi fails - Airbag Node (NAB/ORC) FAILED! - Request out of range error

Post by djbase667 » 24 Oct 2022, 08:34

nope :( ...

Got another Blue and me, got the same error but it did do the necesarry to register the replaced blue and me module.

So even with the error my main problem As fixed...

I assume the hex is for another type of airbags....

Post Reply