Multiecuscan

Hello
Thanks for the reply.
I have already tried with the value 80 but the error "value out of range" remains.
Could the problem be that I have the small modal display?
However, I have seen that someone is able to visualize the temperature even with the small display ... Is there any other Byte to change for this type of display?

In Multiecuscan don't give a ducato, but choose Fiat Panda 2010 Natural Power, go to BCM, adjust and view the outdoor temperature. Then proxy alighment and it's done. So i activated and it works.

I tried and it doesn't work with the small display .. maybe because you have the big display .. This video is the big display .. .

And what does it write when activation and proxy alignment is done? Otherwise, the temperature is not always output on the small display. It is in the top row and must be switched to with the button in the wiper lever.

When I align the proxy He writes me "error value out of range" I see that the body detects the temperature but this is not transmitted to the display.

Does anyone know who activates the reversing camera?

Hello.
I try to activate outdoor temperature in Doblo 1.4 8V from 2009.

This is my can configuration data:
00 00 00 0B 00 00 00 0B 00 00 00 02 00 00 00 00
00 00 00 0B 00 00 00 09 00 00 00 0B 00 00 00 09 00 00 00 09
35 31 37 37 39 37 39 37 20 20 20 50 50 45 41 43 45 45 45 53 49 20 05 05 19 0B 00 00 00 09 00 00 00 81 C8 0D 01 04 0C 17 07 00

Which byte is responsible from outdoor temperature?