O2 VOLTAGES

multiecuscan program usage help
Post Reply
Davidb
Posts: 10
Joined: 15 Jan 2021, 08:37

O2 VOLTAGES

Post by Davidb » 08 Mar 2021, 13:27

I am led to believe the O2 sensors on the Fiat 500 abarth which are 4 wire type use the Nernst principal fir measuring O2 concentration from 0 1 to 0 9v....I read 4 v and upto 5V.... This is intermittent.... Starts off in open loop with reasonable voltages.... Then goes high..... But it has on an occasion run perfectly in closed loop with the exoected 0 1 and 0.9v....Original fiat sensors used for replacement already...any clues to causes??

Post Reply