DRL Default setting

multiecuscan program usage help
Post Reply
BigB24
Posts: 1
Joined: 03 Jan 2021, 15:26

DRL Default setting

Post by BigB24 » 03 Jan 2021, 15:30

Hi all,

Does anyone know whether it's possible to change the default parameters for the DRL lights? I.e always on rather than turning off with dipped/full beams?

I have some additional lighting wired into the DRLs that I would like to be always on.

Vehicle is: Abarth Punto Evo 1.4


Thanks!

s130
Posts: 948
Joined: 20 Jan 2010, 10:07
Location: Wrexham, North Wales

Re: DRL Default setting

Post by s130 » 03 Jan 2021, 18:31

Can't comment on the technical setting options but would advise that in the UK and EU DRLs are legally required to DIM / reduce output or turn off when headlamps are turned on.

This being the case then unless the US/other world regions do not require the dimming/turning out of the DRLs then it is fairly unlikely that there is the ability to change this characteristic operation.
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus

Post Reply