Obdlink SX interface not found

multiecuscan program usage help
Post Reply
jakuari
Posts: 3
Joined: 12 Sep 2020, 18:50

Obdlink SX interface not found

Post by jakuari » 12 Sep 2020, 18:59

Hello,

I have the proper drivers for obdlink SX, windows 10 recognizes it fine and it works in OBDwiz.

Multiecuscan cannot connect to the interface, no matter what I try. It just says connection timed out. I've tried every interface type and COM port and baud rate.
Curiously, OBDwiz will only connect to the interface with baud rate 100 000. This is not an option with multiecuscan.

I got the adapter from mister.diagnostic.fr and it should be genuine.

Is there some driver/hardware compatibility issue that is not documented?

Here's a screenshot to prove something.

Post Reply