Fiat Seicento MPI 2002 Doesnt connect to delete Airbag Error

multiecuscan program usage help
Post Reply
Gallier
Posts: 1
Joined: 07 Sep 2020, 14:19

Fiat Seicento MPI 2002 Doesnt connect to delete Airbag Error

Post by Gallier » 07 Sep 2020, 14:28

Hello. I Write from Germany...

My Fiat Seicento have a OBD2 Connector.

I Use a VAGCom Interface and can connect to the Data from the engine...

But i became no connect to the Airbag!

I would midified my Interface and Car:
Interface: Pin 4+5 together
Car: Pin 4 + 5 together
Interface: Pin16 to Pin 16 from the Car
Interface Pin 3 to Pin 7 from the Car, but teh Car have no Wire on Pin 7!

I must delete the Airbag Error....

Can anybody help ne Please?

s130
Posts: 941
Joined: 20 Jan 2010, 10:07
Location: Wrexham, North Wales

Re: Fiat Seicento MPI 2002 Doesnt connect to delete Airbag Error

Post by s130 » 08 Sep 2020, 09:07

You have an error in the wiring.

You need to connect Pin 7 of the KKL Interface to Pin 3 on the car.

You did it the other way round.
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus

Post Reply