Calibrating Alfa Giulia Airbag

multiecuscan program usage help
Post Reply
sslimss
Posts: 1
Joined: 21 Dec 2019, 05:36

Calibrating Alfa Giulia Airbag

Post by sslimss » 21 Dec 2019, 05:40

Can anyone tell me where to find the program in multiecuscan to calibrate the Alfa Giulia airbag ? Thanks

s130
Posts: 941
Joined: 20 Jan 2010, 10:07
Location: Wrexham, North Wales

Re: Calibrating Alfa Giulia Airbag

Post by s130 » 21 Dec 2019, 10:04

What do you mean by calibrate?

Currently on the Giulia air bag support in MES there are no "Actuators" and this is where any calibration or testing of air bag and pre-tensioner/seat belt indicators would be.
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus

shpuncik
Posts: 306
Joined: 19 Oct 2018, 16:43

Re: Calibrating Alfa Giulia Airbag

Post by shpuncik » 06 Jan 2020, 01:53

s130 wrote:
21 Dec 2019, 10:04
What do you mean by calibrate?

Currently on the Giulia air bag support in MES there are no "Actuators" and this is where any calibration or testing of air bag and pre-tensioner/seat belt indicators would be.
In technical service manual there is function to calibrate airbag module with witech. You have to do it when new airbag ECU is installed. Haven't tested it but my guess is you have to do it after you install used one too.
If ECU is not calibrated there is DTC which says something similar to "airbag module not calibrated" and airbag light stays on after ignition is switched on. It won't even blink as it normally does after 5s when ignition is switched on - just constant ON.

Post Reply