renegade from alogen to full led

multiecuscan program usage help
Post Reply
gianco
Posts: 6
Joined: 24 Nov 2018, 15:18

renegade from alogen to full led

Post by gianco » 11 Sep 2019, 21:19

i have a renegade my 2015 with alogen light.

i had to retrofit oem full led beams of my2019.

to verify that low and high beam can be on at same time,
i done activation on mes, of "xeno lights", and "shutter"

after i done proxy alignement.


now low and high can be on at same time when, switch lever is on high beam.

after i done that, i plugged the led beam only for test.
and it's ok.

BUT:the level aiming of beams on dash panel switch don't work....

it works if i plug the old alogen.

cuold this be, because i done proxy alignement with alogen beams and not led one?

if i do proxy alignement with led fitted it should work?

Post Reply