Lancia Delta 1.4 2009 Remote progamming

multiecuscan program usage help
Post Reply
shadowfox64
Posts: 2
Joined: 01 Jul 2019, 12:28

Lancia Delta 1.4 2009 Remote progamming

Post by shadowfox64 » 01 Jul 2019, 12:35

Hi everyone,

I have a real elm327 and an officially registered Multiecuscan..

I can connect on the can bus to the body computer and there i can select add remotecontols..

After entering my cars pincode it says, press Y and after that press any key on the remote to learn it.

As soon as I entered Y it says "FUNCTION UNSUPPORTED".

I bought the program cause it said it fully supported my body computer.. Please guys help me out…

All settings are correct and there is no high latency.. Regards John

s130
Posts: 941
Joined: 20 Jan 2010, 10:07
Location: Wrexham, North Wales

Re: Lancia Delta 1.4 2009 Remote progamming

Post by s130 » 02 Jul 2019, 09:31

Contact MES support directly.

Also use the "Send Report" button (lower right of screen to the left of the MES logo) to send a report.
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus

shadowfox64
Posts: 2
Joined: 01 Jul 2019, 12:28

Re: Lancia Delta 1.4 2009 Remote progamming

Post by shadowfox64 » 02 Jul 2019, 09:46

Hi S130,

Thanks for your reply!

I did contact MES support twice, but not using the button you suggested!

So I will give that a try, regards John :D

Post Reply