Help Needed - ELM 327 Mod and Proxi Alignment for 2009 Abarth 500 (RHD)

multiecuscan program usage help
Post Reply
tobiasR
Posts: 4
Joined: 06 Jan 2019, 20:46

Help Needed - ELM 327 Mod and Proxi Alignment for 2009 Abarth 500 (RHD)

Post by tobiasR » 03 Feb 2019, 17:16

Dear All

I recently changed the analogue speedo of my 2009 car to a 2015 TFT speedo.

I have bought a ELM 327 Plug from ebay that doesn't quite work. I can scan some ecus with it but even with the yellow plug I cannot access body computers or do a proxi alignment.

I have broken open the plug in hopes to find resistor 121 which I cannot. Slot r2 on the board has two welding spots but no resistor on it.

IF anyone could please tell me how I can make it work you would be saving me a lot of money ordering new plugs.

Thanks

TR

Image
Image
Image
Image

kobra
Posts: 19
Joined: 16 Mar 2011, 18:22

Re: Help Needed - ELM 327 Mod and Proxi Alignment for 2009 Abarth 500 (RHD)

Post by kobra » 03 Feb 2019, 20:56

Elements in the program highlighted in red require the purchase of a license. You have the Fee version of the program, so you can not connect any interface unless you purchase the program's program.

Post Reply