[Airbags] Errors are not erased

multiecuscan program usage help
Post Reply
spidermat
Posts: 2
Joined: 28 Jan 2019, 18:27

[Airbags] Errors are not erased

Post by spidermat » 28 Jan 2019, 18:36

Hi :)

My name is Mathieu, I live in France and I have an Alfa Romeo GTV 3.0 V6 :mrgreen: With the airbag light...

I have MES 4.3 FREE EDITION and I can read the errors but impossible to clear them...

See the video (just make now) : https://www.youtube.com/watch?v=uZmjzdOdoj0

Question : If I a buy the REGISTERED version, can I clear the errors ?

Of course I tried to move the cables....

Thank you :D

s130
Posts: 941
Joined: 20 Jan 2010, 10:07
Location: Wrexham, North Wales

Re: [Airbags] Errors are not erased

Post by s130 » 29 Jan 2019, 10:54

According the vehicles supported list you should be able to clear the airbag fault codes with the free version.

I don't like the look of the 01 - Control Unit Fault - Unknown/internal error.

This could be a control unit hard fault that fails to be reset and is also causing the other error codes as well.
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus

spidermat
Posts: 2
Joined: 28 Jan 2019, 18:27

Re: [Airbags] Errors are not erased

Post by spidermat » 29 Jan 2019, 18:33

Thank you for your answer.

Ok for the free version, and I'm agree with you as concern the Unit Fault... the light goes ON 2 month ago for information.

Maybe it's possible to reinit the airbag ECU ? Or I need to buy a new one ?

Mathieu

Post Reply