Fully working interfaces

multiecuscan program usage help
Post Reply
Airidas36
Posts: 1
Joined: 11 Dec 2018, 19:30

Fully working interfaces

Post by Airidas36 » 11 Dec 2018, 19:42

Hello everyone,

I am searching for an interface for my Fiat Stilo 2006 1.9JTD, that is supported in MES, and that I could connect to all modules (ofcourse except airbag and ABS, because they require additional adapters) and make adjustments, read data, delete faults. My chinese copy of ELM327 isn't working, and I want to get a working interface by not paying 100 euros + shipping :roll: . I've found this https://www.multiecuscan.it/en-us/elm-327-v-1.4-modificata-per-multiecuscan-con-software-free/
modified interface that is distributed by MES itself, so just to be sure I wanted to ask, will I be able to connect to most of the modules and make adjustments? If not, what are my other options?
Thanks in advance

s130
Posts: 575
Joined: 20 Jan 2010, 10:07
Location: Southampton, United Kigndom
Contact:

Re: Fully working interfaces

Post by s130 » 12 Dec 2018, 10:36

See here: http://www.multiecuscan.net/Distributors.aspx

All these distributors are MultiECUScan recommended and supply proper fully working hardware. They will also offer support if you have problems.

Note that www.multiecuscan.it is one of the recommended.

So yes, in answer to your question www.multiecuscan.it is OK.
Fiat Strada/Ritmo Abarth 130TC, Barchetta 2005 , 500X Cross Plus

Post Reply