sensor readouts zero when check engine displayed

multiecuscan program usage help
Post Reply
coisty
Posts: 8
Joined: 03 Jun 2017, 18:32

sensor readouts zero when check engine displayed

Post by coisty » 24 Aug 2017, 16:27

Hi,
I have a 2007 Bravo 1.9JTD 8v and when recording sensors on the graph connected on the C-CAN network (ECU, ABS and EPS) via the K-Line I get all sensors going to zero when the CHECK ENGNE is displayed on the dash.
Is this normal using a modified elm327 adapter?
I have an ongoing problem with my CE light coming on when turning left only but no fault codes stored.

Is there any way to start the car then disconnect individual modules mainly EPS from the C-CAN network?

Brian

Elaizawam
Posts: 1
Joined: 05 Aug 2017, 02:18
Location: Russia
Contact:

sensor readouts zero when check engine displayed

Post by Elaizawam » 21 Sep 2017, 20:58

Hey guys, I would like to have links start listening only when I am ready to say a command and I would like to do this by simply saying "links" and not have to say "links start listening", how can I do that please?

Post Reply