Fiat 500L, aux heater P0116

multiecuscan program usage help
Post Reply
marker10
Posts: 1
Joined: 23 Feb 2017, 18:26

Fiat 500L, aux heater P0116

Post by marker10 » 23 Feb 2017, 19:08

Hi,

is there anyway to use MultiEcuScan to tell my Fiat 500L -13 (1.4 95 bhp), that it is fitted with a auxilary heater?

Problem is that when the heater is turned on to heat up the cabin and engine (coolant fluid), the car gives a P0116 (implausable signal, engine coolant temp. senor) error.
I heard this is a common problem with some EURO6 engines with aux heaters fitted (BMW, VW, Audi etc), due to the ECU making a coolant temp check after car has been sitting for 7 hours.

Highly appreciated for the help.

Post Reply