ELM V1.5 ATSPC error

multiecuscan program usage help
Post Reply
Cricco95
Posts: 3
Joined: 08 Feb 2017, 12:37

ELM V1.5 ATSPC error

Post by Cricco95 » 08 Feb 2017, 12:38

Hi,
I have an error while connecting to my Punto '03 1.3 MJT with this interface (https://www.amazon.it/KKMOON-V1-5-Inter ... ords=obd+2). It is an ELM327 V1.5 and when I tried to test it I got a connection timeout on ATSPC.

The interface uses CH340 series chip and ISO 142303-4, I checked these values with ScanMaster-ELM which works and recognize the interface.

How can I solve this?

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: ELM V1.5 ATSPC error

Post by Alfaeddy » 10 Feb 2017, 07:38

Hello

Try again with other baud settings!

But probably the V1.5 ELM will not work with MES.

For the v1.5 it is very different some work different unfortunately not

Greeting Eddy

Cricco95
Posts: 3
Joined: 08 Feb 2017, 12:37

Re: ELM V1.5 ATSPC error

Post by Cricco95 » 10 Feb 2017, 14:55

So there are not possibilities to get it working? Should I modify it or I need to wait a support into a newer version of MES?

Alfaeddy
Posts: 1350
Joined: 19 Feb 2011, 17:43
Location: Germany , Aarbergen

Re: ELM V1.5 ATSPC error

Post by Alfaeddy » 13 Feb 2017, 09:04

Hello

No, unfortunately, no chance
Since version v1.5 is a purely Chinese variant.
This version never existed from ELM elektronics

Greeting Eddy

Bumb
Posts: 7
Joined: 24 Mar 2017, 06:07

Re: ELM V1.5 ATSPC error

Post by Bumb » 24 Mar 2017, 06:30

Does u found a fix? I have the same problem
Attachments
IMG_1123.PNG
IMG_1123.PNG (50.39 KiB) Viewed 2715 times

Post Reply