Dashboard errors

multiecuscan program usage help
Post Reply
ciano65
Posts: 2
Joined: 10 Oct 2016, 10:22

Dashboard errors

Post by ciano65 » 10 Oct 2016, 10:40

Hi all,
I'm a new user of the software, and i have a an issue:
I'm using a ELM327 1.4 modified interface on a Lancia Delta 1.4 ecochic; when i connect the interface to the pc the dashboard gives errors of asr not available, fuel block not available and some other. I can connect to the CAN module and try to clear errors, but they still remain, otherwise all seems working fine, i have been able to reset service and to test some actuators.
After disconnection, and switching off the key all return ok in the dashboard.
Have anyone had this problem?
Thank

Inizio
Posts: 1
Joined: 18 Dec 2016, 18:11
Location: Austria
Contact:

Re: Dashboard errors

Post by Inizio » 18 Dec 2016, 18:17

HI!

I have the same errors with my Lancia Delta 1.4 T-Jet and 1.8 Di-Jet.
No idea why but maybe the programmer can help!?

BR
Inizio

gsimpson
Posts: 3
Joined: 07 Jan 2017, 22:47

Re: Dashboard errors

Post by gsimpson » 07 Jan 2017, 22:55

Try cleaning the power fuse to dash so it is getting good power supply.

birrohgt
Posts: 11
Joined: 21 Feb 2018, 00:30

Re: Dashboard errors

Post by birrohgt » 21 Feb 2018, 21:08

I also have the same problem on a bravo tjet 1.4

I think it's the interfaces because it does so even without connecting the multiecoscan software

then in alignment does not see all the control units

does anyone have a solution?

Post Reply